Discussion:
FLrig 1.3.17 Issues
(too old to reply)
steve.frodo.5632-/1bC63wxbnBWk0Htik3J/w@public.gmane.org [linuxham]
2014-10-22 12:22:49 UTC
Permalink
I'm running a Kenwood TS-570 on a RT-Systems Serial-USB cable, it does this on 2 different computers. It worked fine on all previous version on both Windows and Linux. Then version 1.3.17 came out, now it don't work properly. It keeps setting the sliders to 0 no matter what you set the polling for. I have tried every setting there is and nothing fixes the issue. I can't believe I'm the only one having this problem. I've tried E-mailing the author of the software but it comes right back as undeliverable! does anyone know how to contact him?
Larry Levesque ka1vgm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org [linuxham]
2014-10-23 00:09:29 UTC
Permalink
I have the same issue here.

Try changing the frequency on flrig for VFO B without pressing the VFO B
button.
This changed the frequency of my radio, and I also happened to notice it
automatically switched the radio to VFO B on startup of flrig.

Not sure exactly what changed but it works normally on 1.3.16
Post by steve.frodo.5632-/1bC63wxbnBWk0Htik3J/***@public.gmane.org [linuxham]
I'm running a Kenwood TS-570 on a RT-Systems Serial-USB cable, it does
this on 2 different computers. It worked fine on all previous version
on both Windows and Linux. Then version 1.3.17 came out, now it don't
work properly. It keeps setting the sliders to 0 no matter what you
set the polling for. I have tried every setting there is and nothing
fixes the issue. I can't believe I'm the only one having this problem.
I've tried E-mailing the author of the software but it comes right
back as undeliverable! does anyone know how to contact him?
--
*KA1VGM
Larry Levesque*
Loading...