support for Icom IC-7200

[Brian Lloyd]

Is anyone using the [relatively] new Icom IC-7200 in Linux? If so, how are
you treating the radio for CAT and how is the audio CODEC handled?

73 and thanks in advance!

[Harry Bloomberg]

This post might be inappropriate. Click to display it.

[wa4rg-/[e-mail] [linuxham]]

I have connected my 7200 to the pc with the usb cable. I've got plenty of signals on the waterfall but I have been unable to key the radio. Rigcat will not permit me to set my stop bit to "0".

Ideas?

[Ed [e-mail] [linuxham]]

Post by wa4rg-/***@public.gmane.org [linuxham]
I have connected my 7200 to the pc with the usb cable. I've got
plenty of signals on the waterfall but I have been unable to key the
radio. Rigcat will not permit me to set my stop bit to "0".
Ideas?

OS ???


The 7200 uses 1 stop bit. It has to be either 1 or 2, not 0.

Ed


------------------------------------
Posted by: Ed <autek-***@public.gmane.org>
------------------------------------

[wa4rg-/[e-mail] [linuxham]]

Ubunu 14.04.1

[Ed [e-mail] [linuxham]]

Post by wa4rg-/***@public.gmane.org [linuxham]
Ubunu 14.04.1

From a terminal::

sudo adduser (yourusernsame) dialout

Log out and back in. You should be good to go.

Ed W3NR


------------------------------------
Posted by: Ed <autek-***@public.gmane.org>
------------------------------------

[w1hkj]

Post by Brian Lloyd
Is anyone using the [relatively] new Icom IC-7200 in Linux? If so, how
are you treating the radio for CAT and how is the audio CODEC handled?
73 and thanks in advance!

The alpha version of flrig includes the IC7200. It is actively being
tested and code changes made in the application for it's support. See
http://www.w1hkj.com/alpha/flrig/

Dave

[Brian Lloyd]

This post might be inappropriate. Click to display it.