FLRIG resets IF/dsp filter of Icom 7200 to Narrow (50)

[[e-mail] [linuxham]]

Flrig 1..3.16 (Windoze 7-64) resets the M IF filter to its most narrow. The change persists when restarting after shutting down. Anything I can do to remedy this?


Thanks,


~Bart/KH7C

[Ed [e-mail] [linuxham]]

Post by ba-***@public.gmane.org [linuxham]
Flrig 1..3.16 (Windoze 7-64) resets the M IF filter to its most
narrow. The change persists when restarting after shutting down.
Anything I can do to remedy this?
Thanks,
~Bart/KH7C

Under the Config tab do you have the 2 boxes for the rig status
unchecked and is this using flrig stand-alone?

Ed W3NR


------------------------------------
Posted by: Ed <autek-***@public.gmane.org>
------------------------------------

[[e-mail] [linuxham]]

I did have one or both checked (can't remember, and recently un-checked both but have not yet seen if this will fix the problem).

Not sure I understand what you mean by stand-alone. I do use it for XML-RPC for fldigi. That is the only way I use it.


Thanks,


~Bart/kh7c