BPQ/FLDIGI/KISS testing on 7103 MFSK32/1500

[mitchwinkle-/[e-mail] [linuxham]]

Call: AC4IY-4 (bbs) or AC4IY-2 (Node)


Freq : 7103
WFF : 1500
Mode : MFSK32
Power 20W
Rig: FT-897
Ant: G5RV (essentially NDIS as it is close to the ground)


Attached to LinBPQ packet system on 2m (port 2) near Richmond, VA


Let me know if you connect or hear the system in operation please!


Have fun,


Mitch

[mitchwinkle-/[e-mail] [linuxham]]

I slid the frequency up to 7103.5 to skirt the ALE soundings.

[mitchwinkle-/[e-mail] [linuxham]]

Also beaconing :

"de AC4IY-2 LinBPQ Node FM17gf"


on 6 minute intervals.

[mitchwinkle-/[e-mail] [linuxham]]

Off for the evening.

Local packet node/bbs has gotten itself into a nit, so I need to turn off my system so it can reset it's routing table overnight.

[mitchwinkle-/[e-mail] [linuxham]]

May be a while before I can bring it back up. Working out 2m packet forwarding and having my "Big Dog" quad core cleaned and checked out. Stay tuned.

[Charles Brabham [e-mail] [linuxham]]

I looked on 40m but saw no signals there.

Am back on 10.145.5 MHz USB +1500 from early morning until 0130 UTC
daily. MFSK32 mode.

73 DE Charles, N5PVL

Post by mitchwinkle-/***@public.gmane.org [linuxham]
May be a while before I can bring it back up. Working out 2m packet
forwarding and having my "Big Dog" quad core cleaned and checked out.
Stay tuned.

[mitchwinkle-/[e-mail] [linuxham]]

I will check that later. Charles. I have my monster PC being cleaned and tested for a random power off issue so not wanting to tie up my other desktop full time just yet. Maybe we can keep this thread going for "Who is testing what and where".